View S2MA-13-F_1303600.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODELS: S2A S2B S2D S2G S2J S2K S2M S2AA S2BA S2DA S2GA S2JA S2KA S2MA
S2A/A - S2M/A
1.5A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features
* * * * *
Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 50A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 3) SMA Min 2.29 4.00 1.27 0.15 4.80 0.10 0.76 2.01 Max 2.92 4.60 1.63 0.31 5.59 0.20 1.52 2.62 SMB Min 3.30 4.06 1.96 0.15 5.00 0.10 0.76 2.00 Max 3.94 4.57 2.21 0.31 5.59 0.20 1.52 2.62
B
Dim A
Mechanical Data
* * * * * * * *
Case: SMA/SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 Polarity: Cathode Band or Cathode Notch Marking: Type Number, See Page 2 Ordering Information: See Page 2 Approximate Weight: SMA 0.064 grams SMB 0.093 grams
A
B
C
C D E
D
J
G H J
H
G E
All Dimensions in mm A Suffix Designates SMA Package No Suffix Designates SMB Package
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 100C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Total Capacitance (Note 1) Typical Thermal Resistance, Junction to Terminal (Note 2) Operating and Storage Temperature Range @ IF = 1.5A @TA = 25C @TA = 125C Symbol VRRM VRWM VR VR(RMS) I(AV) IFSM VFM IRM CT RqJT Tj, TSTG S2 A/AA 50 35
@TA = 25C unless otherwise specified
S2 B/BA 100 70
S2 D/DA 200 140
S2 G/GA 400 280 1.5 50 1.15 5.0 125 20 20 -65 to +150
S2 J/JA 600 420
S2 K/KA 800 560
S2 M/MA 1000 700
Unit V V A A V A pF C/W C
Notes:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
DS16004 Rev. 11 - 2
1 of 3 www.diodes.com
S2A/A - S2M/A
a Diodes Incorporated
Ordering Information
Device* S2xA-13-F S2x-13-F
(Note 4) Packaging SMA SMB Shipping 5000/Tape & Reel 3000/Tape & Reel
* x = Device type, e.g. S2AA-13-F (SMA package); S2A-13-F (SMB package). Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
YWW XXX(X)
XXX = Product type marking code, ex: S2A (SMB package) XXXX = Product type marking code, ex: S2AA (SMA package) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52
1.2
IF, INSTANTANEOUS FORWARD CURRENT (A)
1.5
10
IAV, AVERAGE FORWARD CURRENT (A)
1.0
0.9
0.6
0.1
0.3
Resistive or inductive load
Tj = 25C
0
0.01 0.5 0.7 0.9 1.1 1.3 1.5
20
40
60
80
100
120
140
160
TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
1000
IFSM, PEAK FORWARD SURGE CURRENT (A)
60
Single Half-Sine-Wave
50
100
40
10
Tj = 125C
30
1.0
20
0.1
Tj = 25C
10
0.01
0 1 10 100
0
20
40
60
80
100
120
140
NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve DS16004 Rev. 11 - 2 2 of 3 www.diodes.com
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics
S2A/A - S2M/A
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS16004 Rev. 11 - 2
3 of 3 www.diodes.com
S2A/A - S2M/A

▲Up To Search▲

Price & Availability of S2MA-13-F

	To Download S2MA-13-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .